| T O P I C R E V I E W |
| WhistlePipes |
Posted - 17/02/2008 : 5:20:06 PM
Does anyone know where I can find schematics to build a cheap MIDI pipe driver board? Or kits? |
| 6 L A T E S T R E P L I E S (Newest First) |
| propellanttech |
Posted - 18/04/2009 : 5:46:06 PM
quote:
Originally posted by WhistlePipes
Thanks. I see a new page here: http://www.ucapps.de/mbhp_sdcard.html
Nope, not our system.
Our system is not associated with the ucapps website. But interesting to see others are doing the same thing.
Not sure all of the features of the Midibox system, but we can give our specs if you need.
James
James Long
Owner/Production Manager
Lil Brother SMT assembly Services
|
| WhistlePipes |
Posted - 18/04/2009 : 4:43:43 PM
Thanks. I see a new page here: http://www.ucapps.de/mbhp_sdcard.html |
| James Long |
Posted - 27/03/2009 : 03:47:17 AM
We are working on a SD Card Midi player, but have been covered up with work for the last month.
It is quite a way's off. Probably 6 months or so, until it will be available on the market.
I do not know of any other player, than the one Phil wrote a review on.
The one in design will be a player and output device, on one board.
Sorry I couldn't help further,
James L |
| WhistlePipes |
Posted - 25/03/2009 : 4:55:26 PM
quote:
Originally posted by Johnc
whistlepipes
You may want to check out the midibox devices and kits described on the website
midibox.org or www.uCApps.de. I am using the core kits and Dout kits to drive pipe magnets. Currently I have 5 ranks of pipes running, using jOrgan as a relay.
Johnc
I bought some of the DOUT boards awhile back, but have not assembled them as of yet (using ULN drivers on the board). I was also looking to use an SD card player for the MIDI files.
Do you find the DOUT circuit boards to be heavy enouph to handle lets say 50 ohm pipe valve magnets? The ground traces look small, especially to handle many pipes on all at once.
Where can I find JOrgan info? |
| Johnc |
Posted - 11/11/2008 : 7:02:10 PM
whistlepipes
You may want to check out the midibox devices and kits described on the website
midibox.org or www.uCApps.de. I am using the core kits and Dout kits to drive pipe magnets. Currently I have 5 ranks of pipes running, using jOrgan as a relay.
Johnc
|
| aobg |
Posted - 23/02/2008 : 03:27:57 AM
Sorry, don’t know of any kits but I use j-omega boards. Cheep works every time and A1.
MTP-7: 32-Note MIDI to Parallel Converter
The price of this unit is £63 (UK), $129 (USA) or E94 (Europe), including installation instructions and technical support by e-mail/telephone.
MTP-8: 64-Note MIDI to Parallel ConverterThe price of this unit is £89 (UK), $182 (USA) or E132 (Europe), including installation instructions and technical support by e-mail/telephone.
http://www.j-omega.co.uk/
Yours Phil Radford AOBG website & forums administrator. |
